|
|
|
Low-cost, high performance digital crane scale for tight budgets
Intercomp's advanced design
makes this remarkable crane scale the first choice over other electronic units.
It's value packed with the industry's most wanted features. Our ultra-high
resolution, 20-bit A/D converter provides the highest accuracy available — ±0.1%
of applied load.
Our unique design flexibility lets you choose the model and weighing capacity
you need — ranging from 250 to 20,000 lb / 125 to 10,000 kg. Keypad setup and
digital calibration enhance ease of operation.
All electronics are shock mounted in a weatherproof cast aluminum case. This
assures maximum protection against moisture, dust, and rough usage. High
visibility 0.8 inch/20 mm LED digital readout provides easy reading of weights;
recessed push button switches allow simple, trouble-free operation.
Power is supplied by 8 "D" cell batteries. Efficient microcontroller gives up to
100 hours of battery life. All units carry a full one-year parts and labor
warranty. For all your overhead industrial weighing needs, look to Intercomp
every time.
| CS1500™ Specifications | |||||||||
| Capacity | Graduation | A | B | C | D | E | F | Approx. Weight | |
| 250 lb
125 kg |
$1495.00 | 0.1 lb
0.05 kg |
9.8 in.
249 mm |
1.5
38 |
1.25
32 |
1
25 |
1.4
35 |
0.85
21 |
20 lb
9 kg |
| 500 lb
250 kg |
$1495.00 | 0.2 lb
0.1 kg |
9.8 in.
249 mm |
1.5
38 |
1.25
32 |
1
25 |
1.4
35 |
0.85
21 |
20 lb
9 kg |
| 1,000 lb
500 kg |
$1695.00 | 0.5 lb
0.2 kg |
12.8 in.
325 mm |
2.65
67 |
2
51 |
1
25 |
1.4
35 |
0.85
21 |
20 lb
9 kg |
| 2,000 lb
1,000 kg |
$1695.00 | 1 lb
0.5 kg |
12.8 in.
325 mm |
2.65
67 |
2
51 |
1
25 |
1.4
35 |
0.85
21 |
20 lb
9 kg |
| 5,000 lb
2,500 kg |
$1895.00 | 2 lb
1 kg |
19.6 in.
498 mm |
3
76 |
2.25
57 |
1.7
43 |
2.5
64 |
1.8
46 |
36 lb
16 kg |
| 10,000 lb
5,000 kg |
$1695.00 | 5 lb
2 kg |
19.6 in.
498 mm |
3
76 |
2.25
57 |
1.7
43 |
2.5
64 |
1.8
46 |
36 lb
16 kg |
| 20,000 lb
10,000 kg |
$2795.00 | 10 lb
5 kg |
24 in.
610 mm |
4
102 |
3.1
80 |
2.4
61 |
3.25
83 |
2.6
66 |
45 lb
20 kg |
 |
Rugged industrial design/large LED/LCD display |
|
|
Capacities up to 20,000 lb/10,000 kg |
|
|
On/off, peak hold, tare, lb/kg, zero, tare clear, total and print |
|
|
Standard "D" size alkaline or ni-cad batteries |
|
|
Keypad calibration and setup with ±0.1% accuracy |
| Controls | |
| General: | Zero, lb/kg, On, Off |
| Display: | 0.8 inch/20 mm high - 5 1/2" digit light emitting diode (LED) |
| Indicators: | lb/kg |
| Electrical | |
| Battery Life: | Up to 100 hours continuous use |
| Batteries: | 8 x D-size disposable alkaline dry cells or rechargeable nickel-cadmium cells (Not included) |
| Resolution: | 20 bit A/D delivers over 1,000,000 internal counts |
| Filtering: | 6 pole, 10 hertz low pass |
| Auto Shut-Off: | Low battery, or after 5 minutes without use |
| Auto-Zero: | Satisfies all NIST/OIML requirements |
| Zero: | Up to 100% excluding NIST/OIML units |
| Performance | |
| Speed: | 3 seconds to typical reading |
| Accuracy: | ±0.1% of reading |
| Environmental | |
| Humidity: | 10 to 95% non-condensing |
| Temperature: | Operating -20°C to +60°C/-4°F to +140°F |
| Physical | |
| Nominal Overload: | 200% of capacity |
| Maximum Overload: | 500% of capacity |
| Dimensions: | See illustration |
| Enclosure: | NEMA IV cast aluminum case |
| Hook or Eye: | Crosby - Laughlin or equivalent |
| Options: | RS232 serial output
LCD display Stainless Steel Housing Direct Power 120/220 Volt Battery Charger 120/220 Volt OIML approval pending |
*Specifications subject to change without notice
Call us for orders, prices, quotes and more.
TEL. --- (800) 257-6707
(562) 921-6707
FAX --- (562) 921-0307
13321
Alondra Blvd. Santa Fe Springs CA. 90670