Truck scale.jpg (18210 bytes)
Easily transported in your trunk, the "Load Ranger" is portable with simple set up.


 

MSI-5300 "Load Ranger"
Weigh your load on the road, at the jobsite or almost anywhere.
    Today more than ever, there is great concern over damage to the nation's highways, secondary streets and bridges caused by overweight and unbalanced vehicles. Most every state and municipal law enforcement agency have adopted and practice weight inspection programs in an effort to insure highway safety and protect taxpayer investment.

   

SPECIFICATIONS for the Load Ranger
Accuracy: 1.0% Approved to NIST Class III standard
Capacity 20,000 lbs. (10,000kgs) per pad
Resolution 20 lbs. (10 kgs), 50 lbs. (20 kgs) - NIST
Display 5 digit, 0.8 in. (20 mm) LCD
Annunciators: Low battery  
Operating Temperature: -25' tO 140" FX-32' tO 60'C)
Safe Overload: 150% of capacity 
Ultimate Overload: 200% of capacity
Weight: 43 lbs. (19 kgs) per pad

By utilizing large capacity fixed truck scales, weight inspections are typically administered at roadside stations along the major highways. Un

fortunately, it has been cost prohibitive to apply the same inspection methods along secondary roads. However, today there is a cost-effective alternative for exercising accurate and spontaneous inspection programs virtually anywhere. Through the application of portable wheel and axle load scales, weight inspection can be administered at a fraction of the cost associated with fixed truck scales. Both law enforcement and trucking companies have benefited alike from this product concept.

Bantam.gif (27037 bytes)
Shown, is the MSI-5200 "Batnam"
6 pad system stowed in it's heavy duty aluminum carry case

     MSI-5200 "Bantam"
Get some mileage out of your wheel weighers ... take 'em on the road.
   Specifically designed for mobile weight enforcement programs, Load Ranger is convenient to use. Extremely lightweight and compact, a weight inspection station may be set up within minutes on a variety of road surfaces. Each weigh pad is totally sealed from outside influences and has 10 tons of loading capacity, while integral ramps allow for easy on and off vehicle loading. Pushbutton controls and a large digital display provide for simple operation and easy reading.
   

SPECIFICATIONS for MSI-5200 " Bantam"
Accuracy 1.0%
Capacity 5200-2P 30,000 lbs. (15,000 kgs) total
5200-4P 60,000 lbs. (30,000 kgs) total
5200-6P 90,000 lbs. (45,000 kgs.) total
Resolution 2500 displayable counts
Power 12 volt rechargeable / 14 hours between charging
Battery Charger 115/230 VAC internal, 12 VDC internal
Display 5 digit, 0.8 in. (20MM) LED
Annuciators  low battery
Operating Temperature 40° to 140° F ( 40 to 60° C)
Safe Overload 150% of capacity
Ultimate Overload 200% of capacity
Weigh Pad Dimensions 24.0 L X 15.5 W x 3.5 H in. (609 x 393 x 89 mm)
Weight 40lbs. (20 kgs. per pad
System Weight 5200-4P 238 lbs. (107 kgs)
5200-6P 344 lbs. (156 kgs)
Meter Dimensions 9 L x 8.5 W x 6 H in. 
(228 x 216x 152 mm)
Carry Case Dimensions 5200-2P 24.5 L x 16.0 W x 18.0 H in.
 (622 x 406 X 457 MM)
5200-4P 26.9L X 23.5 W X 18.0 H in. 
(660 X 597 X 457 mm)
5200-6P 36.5 L x 23.5 W X 18.0 H in. 
(927 X 597 X 457 mm) 

 

 

 Power is supplied by a single 6 volt rechargeable battery, allowing Up to 40 hours of continuous use between charging. A battery charger is included with each set of 4 pads for quick recharging from 110/230 VAC or 12 VDC vehicle power. Load Ranger is pretested and certified by the National Institute of Standards and approved to Class III standards, providing accurate and credible equipment for your inspection needs. The Bantam System Similar in concept and design to the "Load Ranger", MSI's "Bantam" electronic wheel weighing system combines the same mechanical and structural integrity plus many more features for enhanced product versatility and expanded application use.


 Call us for orders, prices, quotes and more info... 
TEL.-(800) 257-6707   (562) 921-6707 
FAX-(562) 921-0307
 13321 Alondra Blvd. Santa Fe Springs CA. 90670